See what belongs behind the walls

Photograph a room or a project in progress. First Fix reads the space and lays out the best heating for it, the wiring routes, the socket positions and the plumbing runs.

Analyse a space

Step 01 — capture

Upload a photo or a walkthrough video

A single clear photo works, but a slow walkthrough video of the whole room lets us read every wall, window and corner — for a fuller, more precise plan. Add the room's measurements before you build it for an accurate heat-load calculation.

Drop a photo or video here

A room photo, or a slow walkthrough — JPG, PNG or MP4

Country & standards

The plan follows that country's electrical, building, heating and plumbing regulations.

The space

Room size (metres)

Optional — lets us calculate the heat load and size the boiler or heat pump.

Anything we should know

A planning guide, not a substitute for a qualified installer's site survey.

Step 02 — read the plan

Five reads, from one photo

01

Heating

The right system for the space

Heat pump, wet underfloor, radiators or electric panel — matched to the building's age, insulation and floor build-up, with output and running-cost notes.

02

Electrics

Wiring routes and socket map

Where cable runs travel, which circuits they belong to, and the exact socket, switch and light positions on each wall with mounting heights.

03

Plumbing

Pipe routes from source to fixture

Hot, cold and waste runs traced through the room, sized for the fixtures you are fitting, with the isolation points that save a later headache.

04

Colour & finishes

A palette tuned to the light

Four paint colours with hex codes and where each one goes — walls, trim, ceiling, accent — plus the finish sheens, chosen for the room's light and proportions.

05

Furniture

A layout that fits the room

Key pieces with positions, purpose and rough sizes, arranged for flow and a clear focal point — realistic for the space, never over-furnished.

How it works

From a single photo to a first-fix layout

No measuring, no CAD. The plan is a starting point for the conversation with your trades — clear enough to mark up on site.

  1. 01

    Photograph the space

    Stand back, get the whole wall in frame, and add a note about the building if you know it.

  2. 02

    First Fix reads it

    Walls, windows, floor build-up and existing services are identified, then matched against how each system performs.

  3. 03

    Take the plan to site

    Keep the layout on your phone, save it to your projects, and hand it to your electrician and plumber.